Today's Special!
phone: (630) 621 4198

  Types of Adhesives 

All Adhesives
Silicone Adhesives
Thermal Management
Film Lamination
Epoxy Adhesives
Coating & Potting
Sealing Solutions
Electrical Conducting
Optical Applications
   »  Optical Silicone

   »  Optical Epoxy

Media Protection
Adhesion & Bonding
Die Attachment
Snap / Fast Cure

Adhesive Details


Select package type
30 mL Syringe, Price: $35.00
100 mL Bottle, Price: $98.00
Input your order qty

USG414 is a one-part water clear potting gel. It is a flowable, addition-curing, silicone that cures at elevated temperature to a very firm optically clear rubbery gel for casting or injection molding of high performance optical components. It has non-corrosive and self-priming adhesion to various substrates. It stays thermo-optically stable with heat and UV exposure and will not yellowing over time. USG414 can be automated to dispense from pails or hand extruded from syringe.

Special Features and Benefits
• Optically clear firm gel
• Non-yellowing and thermo-optically stable
• One component and ready to apply
• Very soft for stress compliance
• Excellent dielectric properties
• Mechanical shock and vibration damping
• Low outgassing and minimal volatile
• Broad range of temperature stability

Typical Applications
• Pot / encapsulate optical parts
• Coat various opt-electronic components
• LED, solar or other optical applications
• Seal lids, covers, housings, connectors
• Vibration dampening
• Thermal stress coupling

Click here to view the Technical Datasheet (TDS) of this product in details (PDF File) »

Processing Instruction

Important! USG414 is platinum cure system. Please keep applied surface / housing clean and avoid using this material on any place that contains sulfur, amine, phosphorous, organo-metals, acid, etc. because these contaminants could inhibit the cure the material. Please let the compound thoroughly thaw after taking it out from freezer. This typically needs half to one hour depending on the size of container.

We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions can be obtained by contacting directly to

USG414 has a shelf life of at least 6 months when stored at < 5°C freezer in the originally sealed container. Storage beyond the date specified does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Safety information
USG414 silicone contains neither toxic nor corrosive substances that might require special handling precautions. General hygiene regulations should be observed. Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from

The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control, especially where other companies’ raw materials are also being used. The recommendations do not absolve the user from the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, clarifying the position. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose. For technical, quality, or product safety questions, please contact directly to

Technical Support


  Shopping Cart is Empty

For bulk orders,
please call us at:
(630) 621 4198

Questions or comments?
Please send an email to: