USG135 is an epoxy-based low viscosity adhesive for impregnating, coating, potting, and bonding electronic components and devices. It is a two-component, readily flowable, addition-curing system that cures at room temperature or elevated temperature to provide strong bonding to silicon, flip chip, BGA, ceramics, LTCC, aluminum, copper, stainless steel, etc. The reduced rigidity also provides better thermal cycle performances. USG135 is sprayable and dispensable.
Special Features and Benefits
• Fast flow for coating, potting and impregnating
• Reduced rigidity for stress compliance
• High structural bonding strength
• Low bleeding, low volatile
• Low ionic content
• Aerospace electronics
• Automotive electronics
• Semiconductor and Telecommunications
• Sealing of electronic devices
• Impregnating / coating of components
• Structural bonding or potting
• Resistance to thermal vibration
USG135 has a shelf life of at least 12 months when stored at ambient in the originally sealed container.
Click here to view the Technical Datasheet (TDS) of this product in details (PDF File) »
Important! Only components A and B with the same lot number may be processed together! Any possible air bubbles in mixing or potting process can be removed by vacuum. Typically a thermal cure (e.g. 110C, 30 min) will give better result than room temperature cure.
We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions can be obtained by contacting directly to USGlue.com.
USG135 has a shelf life of at least 12 months when stored at ambient in the originally sealed container. The 'Best use before end' date of each batch appears on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
General hygiene regulations should be observed. Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from USGlue.com.
The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control, especially where other companies’ raw materials are also being used. The recommendations do not absolve the user from the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, clarifying the position. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose. For technical, quality, or product safety questions, please contact directly to USGlue.com.